Product Details

Product Date:

Size: 1/2”-8”

Class: 150LB-2500LB

Floating Ball, RB&FB

Design standard:

Design: ASME B16.34/API 6D

Face to Face: ASME B16.10 /API 6D

Flange: ASME B16.5/ ASME B16.47A

BW END: ASME B16.25

Test : API 6D

Anti-Fire : API 607/API 6FA

Acid environment: NACE MR 0175

Advantages

Minimal loss of pressure

Easy to opening and closing

Good leak tightness

Compact design

They tested with water test

The 2 piece stainless steel ball valve may the most widely used ball valve. The 2 piece ball valve can open or shut off flow on most liquids or gases quickly and easily and is suitable for like any application where a simple on/off action is needed. by partially opening or closing the valve to various degrees can controll the Flow rate. Through from inlet to outle as as a two-way ball valve it allows flow in any direction straight.

The two piece ball valve is like best priced for full port ball valve (full bore),

Can remain constant and unrestricted for the inside diameter of the pipe.

The 2 piece SS ball valve can have no pressure drop and keeps the flow rate high.

The ball is suspended in the flowing fluid and is kept in position In a floating valve by the compression of two elastomeric seats against it. at the top of the ball connected shaft allows the switch with a quarter turn movement (90 degrees).

The ball which gets pressed against its seats when When the shaft is moved.

With this light weight and economic design,bore sizes suit up to 10 inches: above this, the seats of the valve may not be able to with stand heavier and heavier balls so the valve would not operate safely and efficiently.

Application:

http://www.bjmvalve.com/